Fitting & Assembly; Attach Air Tubing - MDHearingAid AIR User Manual

Fitting and Assembly
Step 1: Select the Correct Ear Dome
Attach Ear Dome to AIR Tubing
Use Right AIR Tubing (Red lettering)
for fitting Right ear. Use Left Tubing
(Blue lettering) for fitting Left ear.
a) Hold the AIR Tubing at the junction
of the Stabilizer Bar with one hand and hold
the 'mushroom' top of the Ear Dome
with the other hand.
b) Push the Ear Dome over the ridges
on the end of the AIR Tubing.
c) Pull in the reverse direction to make
sure the Ear Dome is attached securely.
Please note: while testing different Ear Dome
sizes its best not to attach AIR Tubing to
Hearing Aid Body.
8
Step 1
a)
b)
c)
Insert Ear Dome in Ear Canal
a) Pull the outer ear upward and backward.
With your other hand, hold the AIR Tubing (with Ear
Dome attached) at the junction of the Stabilizer Bar.
b) Insert Ear Dome into the ear canal. It should fit
in ear canal without protruding into the outer bowl
of the ear. When the Ear Dome is too small, there
is space between the Ear Dome and the ear canal,
and you may hear whistling (feedback) when the
Hearing Aid is on.
c) Nod head towards the ground to make sure
that the Ear Dome does not slip out easily.
Repeat the 3 steps above with different sized
Ear Domes to find the best one for you.
a)
b)
c)
9