Power Board And Thermal Sensor Board - Sony VPL-ES7 Service Manual

1-3-4. Power Board and Thermal Sensor Board

Check to see that the seven connectors are
protruding from the MB bracket.
Be careful that the harnesses must not override on
top of this port or must not be pinched by this portion.
Caution :
When attaching the MB bracket, bind the four harnesses into the shape
of "U" and attaching them to the MB bracket.
Power board
CN701
CN605
1-4
Lamp nozzle assembly
Door detection
switch board
7 Dowel
Miniature fuse-links (F602)
Power board
CN603
1 Main board
(Refer to section 1-3-3, steps 2 to 6.)
3 Five tapping screws
(PAN M3 x 7)
Fuse (H.B.C.)
(F601)
6 Remove the three connectors.
2 Screw
(+PSW M4 x 6)
5 MB bracket
Fan
8 Power board
9 Tapping screw
(PAN M3 x 7)
J1
0 Thermal sensor board
Lamp nozzle assembly
Lamp nozzle assembly
4 Remove the fan in the
direction of the arrow.
VPL-ES7/EX7/EX70