Lamp Power Supply - Sony VPL-VW70 Service Manual

1-3-13. Lamp Power Supply

7 G Holder
4 Four screws
(+BVTP 3 x 12)
Protrusion
5 harnesses
3 Remove the harness in the
direction of the arrow A.
1 Remove the hood assembly.
(Refer to section 1-3-2, step 1.)
Protrusion
B
A
2 Open the edge clamp and remove
the harnesses in the direction of the arrow B.
6 Two claws
!- Two clips (BA)
!= Heat sink (BA), Sheet (BA)
Lamp power connector assembly
8 Two screws
X3
(+BVTP 3 x 12)
![ Lamp power supply
X1
9 Remove the lamp power connector
X2
assembly in the direction of the arrow C.
C
0 Two claws
X3
1-11
VPL-VW70