Www.chroma-Q.com - Chroma Color One 100 User Manual

Display Mode:
The LCD is backlit when you access the menus. This will switch off when left undisturbed for 10 seconds.
Personality:
The Color One 100 features a single LED engine with a combination of 6 Red LEDs, 6 Green LEDs, 6 Blue LEDs and 6
Amber LEDs for a total of 24 LEDs. Six Personality modes are available for the control of the fixture LEDs:
Display Ch
1-RGBA 4
2-RGBAI 5
3-HSI 3
4-RGB 3
5-MLED RGB 3
6-Master
7-Slave
Wireless IR Remote:
The Color One 100 can be controlled via wireless IR Remote in standalone operation. The fixture is set in IR Remote
control by selecting IR Remote in the menu No DMX Present.
Point the IR Remote towards the fixture.
The IR Remote features buttons for the following control options:
On and Off
•
Dim Up and Down
•
15 Colors
•
White
•
4 Effects: Full Color Scroll (Flash), Warm Color Scroll (Strobe), Fade In/Fade Out, and Cold Color
•
Scroll (Smooth)
Color One 100 User Manual
1 DMX channel for the control of all Red LEDs
1 DMX channel for the control of all Green LEDs
1 DMX channel for the control of all Blue LEDs
1 DMX channel for the control of all Amber LEDs
1 DMX channel for the control of all Red LEDs
1 DMX channel for the control of all Green LEDs
1 DMX channel for the control of all Blue LEDs
1 DMX channel for the control of all Amber LEDs
1 DMX channel for Intensity Level control of all the channels (RGBA)
1 DMX channel for the control of Hue
1 DMX channel for the control of Saturation
1 DMX channel for the control of Intensity
1 DMX channel for the control of all Red LEDs
1 DMX channel for the control of all Green LEDs
1 DMX channel for the control of all Blue LEDs
(With "Magic Amber" – the term used for the unit's ability to bring in Amber when mixing only
RGB.)
1 DMX channel for the control of all Red LEDs
1 DMX channel for the control of all Green LEDs
1 DMX channel for the control of all Blue LEDs
The unit is set as the Master unit. All settings of the Master unit will be repeated on all Slave
units.
The unit is set as the Slave unit. All settings of the Slave units follow the Master unit.

www.chroma-q.com

Description
7 V1.3 July 2015