Chroma Color One 100 User Manual page 13

4-Technical
In this mode,
Software Version is displayed
•
DMX Data (value) of the LED channels are displayed
•
Internal temperature is displayed
•
The fixture can be set to 4 frequency options. The LED scan rate can be synchronised with the video
•
camera to avoid a flickering effect.
Frequency options:
750 Hz
Calibration data of the LED channels are displayed
•
To display the Software Version,
1. From the Main Menu, press Up Up Up Up or Down
2. Press Enter
To display DMX Data,
1. From the Main Menu, press Up Up Up Up or Down
2. Press Enter
3. Press Enter
To display the temperature of the LED Engine in the fixture,
1. From the Main Menu, press Up Up Up Up or Down
2. Press Enter
3. Press Enter
To set the Frequency,
1. From the Main Menu, press Up Up Up Up or Down
2. Press Enter
3. Press Enter
4. Press Enter
The display shows Done and returns 4-Technical and then Main Menu.
To display the Calibration data,
1. From the Main Menu
2. Press Enter
3. Press Enter
Color One 100 User Manual
1500 Hz 3000 Hz
Enter, the display shows the Software Version Enter Enter
Enter Enter Enter, Up Up Up Up or Down Down Down and select DMX Data Down
Enter, the display shows the DMX channel values
Enter Enter
Enter, Up Up Up Up or Down Down and select Temperature
Enter Enter Down Down
Enter, the display shows the LED Engine Temperature Enter Enter
Enter, Up Up Up Up or Down Down and select PWM Frequency
Enter Enter Down Down
Enter Enter Enter, Up Up Up Up or Down Down Down and select a frequency option Down
Enter to save Enter Enter
Main Menu, press Up Up Up Up or Down Main Menu Main Menu
Enter, Up Up Up Up or Down Down and select Calibration
Enter Enter Down Down
Enter, the display shows the calibration values
Enter Enter
www.chroma-q.com
6000 Hz
Down Down to access 4-Technical Down
Down to access 4-Technical Down Down
Down to access 4-Technical
Down Down
Down to access 4-Technical
Down Down
Down to access 4-Technical Down Down
12 V1.3 July 2015