Table of Contents
Advertisement
5. General Specifications
Item
Printing method
Characters per line
Character size
Character types
Dot density
Printing width
Print speed
Interface
Roll paper
Barcode
Communication packet size
Emulation
LCD
Battery pack
Battery operating time
Battery charger
Environmental
Requirements
Print head life
Drop resistance
*1) When the temperature of the operating environment is 10°C or less, in the memory switch settings, set the
print density to high.
Direct line thermal printing
Maximum 42 cpl
Alphanumeric characters: 12 X 24 dots, 9 X 24 dots, and 7 X 17 dots
Japanese characters: 24 X 24 dots
Alphanumeric characters, expanded graphic characters, JIS Level-1 Kanji Set, JIS
Level-2 Kanji Set, and special characters
203 dpi (8 dots/mm)
48 mm (384 dots)
80 mm/s (max) or 50 mm/s (default)
Bluetooth Spec.
Frequency Range
Bluetooth
RF Power
Modulation method
Oscillation method
RS-232C × 2
Thermal roll paper (57.5 ± 0.5 mm wide with a diameter of Ф40 mm)
1D: JAN, EAN, UPC, ITF, Code39, Code93, Code128, CODABAR(NW-7)
2D: PDF417, QR Code, DATA Matrix
Maximum 8K byte
ESC/POS
128 × 32 dots (LED backlight)
Lithium ion 7.4 V DC (rechargeable), 1130 mAh
Approximately 8 hours (normal mode)
Approximately 45 minutes (continuous printing)
Input: 100 to 250 V AC, 50 to 60 Hz
Output: 8 .4 VDC/0.8 A, Time required for full charge: 4 h
o
0
Temperature *1 )
-20
30% to 80% (for operation)
Humidity
10% to 90% (for storage)
Approximately 50 km
1.2 m. Please note that this value was obtained under testing conditions stipulated
Specifications
Bluetooth Ver 2.1+EDR / Class2 (10m)
2.4GHz ISM BAND (2402~2480 MHz)
Below 10 dBm
GFSK
PLL
o
C to 50
C (for operation)
o
o
C to 60
C (for storage)
- 18 -
Advertisement
Table of Contents
