Star SM-S220I SERIES Hardware Manual page 15

8. Press FEED once to switch the displayed setting from the black mark sensor mode to
the black mark sensor sensitivity.
The current black mark sensor sensitinity will appear on the display.
5 Press MODE twice to set the black mark sensor sensitivity to medium2.
SENSOR LOW g SENSOR MIDIUM1 g SENSOR MIDIUM2
9. Press FEED once to switch the displayed setting from the black mark sensor sensitivity to
the power down.
The current power down will appear on the display.
6 Press MODE once to set the power down to 1 minute sleep.
PWDN NO USE g PWDN 1 min.
After you have configured all of the settings, press and release FEED and MODE at the
same time. The new settings will be printed.
If the settings were not configured correctly, follow the above procedure to configure
the settings again.
- 9 -