Installation; Unpacking; Safety Cautions - KTI Networks KGC-352 Series Installation Manual

Gigabit ethernet media converters 1000base-t to 1000base-sx/lx
Table of Contents

Advertisement

2. Installation

2.1 Unpacking

Check that the following components have been included:
Installation guide (or contained in the product CD)
The Media Converter
If any item is found missing or damaged, please contact your local reseller
for replacement.

2.2 Safety Cautions

To reduce the risk of bodily injury, electrical shock, fire, and damage to
the product, observe the following precautions.
Do not service any product except as explained in your system docu-
mentation.
Opening or removing covers may expose you to electrical shock.
Only a trained service technician should service components inside
these compartments.
If any of the following conditions occur, unplug the product from the
electrical outlet and replace the part or contact your trained service
provider:
- The power cable, extension cable, or plug is damaged.
- An object has fallen into the product.
- The product has been exposed to water.
- The product has been dropped or damaged.
- The product does not operate correctly when you follow
the operating instructions.
Do not push any objects into the openings of your system. Doing so
can cause fire or electric shock by shorting out interior components.
Operate the product only from the type of external power source
indicated on the electrical ratings label. If you are not sure of the type
of power source required, consult your service provider or local power
company.
-11-

Advertisement

Table of Contents
loading

Table of Contents