INSTALLATION
PACKING AND STORAGE
All models are provided with special cardboard packing specific for each unit . The units must be handled manually .
All the information necessary for proper handling during storage and installation is given on the packing .
The storage temperature must be between -25°C and 55°C .
N .B .: Do not disperse the packing in the environment .
After deciding on the place of installation (see the relevant sections below),
to unpack the two units proceed as follows:
Internal unit (Fig . 1):
1 . Cut the two nylon straps .
2 . Open the top part of the packing .
3 . Grip the unit and lift it completely out of the packing .
4 . Remove the side protectors and the nylon enclosure .
Fig . 1
UNIT OPENING
1 . Lift the cover of the unit
2 . Disconnect the display connector
3 . Remove the filters
4 . Remove the panel
5 . Carry out the various installation steps
Fig . 2
7