UNIT INSTALLATION
Place of installation . Complying with the conditions indicated
opposite (Fig . 1), position the unit as low as possible, in any
case ensuring 15cm of free space above it . Before carrying
out wall mounting, make sure the wall can take the weight of
the unit, the air flow is not obstructed by curtains, etc ., and
that the position is suitable to ensure optimum diffusion of air
in the room .
Packing
1 . Cut the two nylon straps .
2 . Open the top part of the packing .
3 . Grip the unit and lift it completely out of the packing .
4 . Remove the side protectors and the nylon enclosure .
Installation . After choosing where to place the internal unit,
use the fixing plate as a template to locate the exact position for
the expansion plugs and for the hole through the wall .
35
110
The unit's plastic enclosure has knockouts (1 . Fig .3) which, if necessary, can be
removed for the hydraulic lines and cables .
8
INSTALLATION
876
786
434
172
Fig . 1
Fig . 2
55
Fig . 3
1