Ipv6 Neighbor Setup - ZyXEL Communications XS1920 Series User Manual

Table 28 Basic Setting > IPv6 > IPv6 Configuration > IPv6 Prefix Setup (continued)
LABEL
Preferred Lifetime
Flags
Add
Cancel
Clear
Index
Interface
Prefix/Prefix Length
Valid Lifetime
Preferred Lifetime
Delete
Cancel

8.9.10 IPv6 Neighbor Setup

Use this screen to create a static IPv6 neighbor entry in the Switch's IPv6 neighbor table to store
the neighbor information permanently. Click the link next to IPv6 Neighbor Setup in the IPv6
Configuration screen to display the screen as shown next.
Figure 58 Basic Setting > IPv6 > IPv6 Configuration > IPv6 Neighbor Setup
Chapter 8 Basic Setting
DESCRIPTION
Specify how long (from 0 to 4294967295 seconds) that addresses generated from the
prefix via stateless address autoconfiguration remain preferred.
The preferred lifetime cannot exceed the valid lifetime.
Select No-Autoconfig Flag to not allow IPv6 hosts to use this prefix for stateless
address autoconfiguration.
Select No-Onlink Flag to not allow the specified prefix to be used for on-link
determination.
Select No-Advertise Flag to set the Switch to not include the specified IPv6 prefix,
prefix length in router advertisements for this interface.
Click this to create a new entry or to update an existing one.
This saves your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation
panel to save your changes to the nonvolatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
Click Clear to reset the fields to the factory defaults.
This is the interface index number. Click on an index number to change the settings.
This is the name of the IPv6 interface you created.
This field displays the IPv6 prefix and prefix length that the Switch includes in router
advertisements for this interface.
This field displays the IPv6 prefix valid lifetime.
This field displays the preferred lifetime of an IPv6 address generated from the prefix.
Check the entry(ies) that you want to remove in the Delete column and then click
Delete to remove the selected entry(ies) from the summary table.
Click Cancel to clear the Delete check boxes.
XS1920 Series User's Guide
83