18.2 Port Authentication Configuration
To enable port authentication, first activate the port authentication method (both on the Switch and
the port(s)) then configure the RADIUS server settings in the Auth and Acct > Radius Server
Setup screen.
Click Advanced Application > Port Authentication in the navigation panel to display the screen
as shown.
Figure 108 Advanced Application > Port Authentication
18.3 Activate IEEE 802.1x Security
Use this screen to activate IEEE 802.1x security. In the Port Authentication screen click 802.1x
to display the configuration screen as shown.
Figure 109 Advanced Application > Port Authentication > 802.1x
Chapter 18 Port Authentication
XS1920 Series User's Guide
150