DeVilbiss GTI Operation Manual
Suction feed spraygun
Hide thumbs
Also See for GTI:
- Operation manual (29 pages) ,
- Operation manual (9 pages) ,
- Operation manual (29 pages)
Table of Contents
Advertisement
Quick Links
See also:
Operating Manual
Advertisement
Table of Contents
Related Manuals for DeVilbiss GTI
Summary of Contents for DeVilbiss GTI
- Page 1 SB-E3-2-361 ISS.05 Operation Manual GTi – Suction Feed Spraygun P 2 - 7 P 8 - 13 P 14– 19...
-
Page 2: Declaration Of Conformity
Operation Manual GTi – Suction Feed Spraygun Important Read and follow all instructions and Safety Precautions before using this equipment Description This product is suitable for use with both waterbased and solvent based coating materials. The design uses EPA compliant atomising technology to reduce overspray and improve coating efficiency. -
Page 3: Safety Warnings
SAFETY WARNINGS Fire and explosion Gloves must be worn when spraying cleaning Solvents and coating materials equipment highly flammable combustible when sprayed. ALWAYS Training – Personnel should be given refer to the coating material suppliers adequate training in the safe use of instructions COSHH sheets... -
Page 4: Parts List
Baffle & Seal GTI-425-K Baffle seal—Kit of 5 GTI-33-K5 Spring Adjusted Needle Packing GTI-445-K2 Spreader Valve GTI-405-K Stud and Screw GTI-408-K5 Needle (for GTI-214 Tip) GTI-420-K Needle (for GTI-213 Tip) GTI-413-K Spring and Pad GTI-409-K5 Bushing GTI-402-K Seal kit of 5 JGS-72-K5... -
Page 5: Materials Of Construction
Specification Air supply connection - Universal BSP and NPS Fluid Supply Connection - Universal BSP and NPS Maximum static inlet pressure - = 9 bar (130 psi) Maximum static fluid pressure - = 9 bar (130 psi) Nominal gun inlet pressure with gun triggered - 2 bar (29 psi) Gun Weight - 500 g Cup Weight -... - Page 6 Installation Important: To ensure that this 2. Attach the Cup Lid assembly m equipment reaches you in first class (27) to the Fluid Inlet connector (17). condition, protective coatings have been used. Flush the equipment 3. Position the Yoke at right angles through with a suitable solvent to the Gun with the Cam lever to before use.
- Page 7 6 and 12. Unscrew valve Accessories Spanner – order SPN-5 Cleaning Brush – order 4900-5-1-K3 Service Kit – order GTi-416 add nozzle size as required (i.e. GTi-416-14) Pressure gauge Attachment – order GA-515 Gun Mounted Regulator – order DVR-501 Lubricant - order GL-1-K10...
Need help?
Do you have a question about the GTI and is the answer not in the manual?
Questions and answers