Related Manuals for Concept Pro AIR3016
Summary of Contents for Concept Pro AIR3016
- Page 1 AIR30 Range Weatherproof Colour/Mono IR Camera USER MANUAL P o w e r e d TE C HN OLO GY AD V A N C E D IN F RA R ED...
- Page 2 CAUTION This installation should be made by a qualified service person and should abide to all local codes. In order to prevent electronic shock and/or destroy waterproof seals, do not loosen any screws on the camera body. Adjust the sunshield cover to avoid exposure of direct sunlight on the lens. Do not touch the front glass directly.
-
Page 3: Packing Contents
The Concept Pro AIR30 is a weatherproof IR camera, suitable for monitoring areas in hostile conditions and in low light. Fixing Bolt for Sunvisor Mounting Bracket External Lens Adjustment Photo Sensor Tri- Axis Points 10 Service Video Output IR LED... -
Page 4: Installation
INSTALLATION Important: Ensure all cautionary procedures are observed during installation. It is recommended the camera is tested during the most demanding environmental conditions such as low light or bright sunlight to ensure continuity of effective CCTV monitoring. You may find the use of an ND filter helpful. Remove the camera unit carefully from the box, reserving the accessory contents in a safe place. - Page 5 CONNECTION Connect the video out port to your video cable running to the monitoring recorder. Check the power supply is of the correct level and connect your power supply into the power port on the Camera. View the picture on a monitoring device to ...
- Page 6 SERVICE VIDEO OUTPUT (AIR3016 / 3026 MODELS ONLY) The Service Video Out panel contains a power indicator and test monitor connection for ease of adjusting the camera settings during installation. VIDEO SERVICE VIDEO OUTPUT CABLE TEST MONITOR AIR3016 / AIR3026 The power indicator LEDs display the power supply being fed into the camera and whether it is too high, low or correct.
-
Page 7: Video Out
DIMENSIONS 85mm (3.35”) 70mm (2.76”) 56mm (2.20”) 3 - 5mm (0.20”) 202mm (7.95”) DC12V IN VIDEO OUT 130mm (5.12”) - Page 8 ON SCREEN DISPLAY (OSD) (AIR3026HG MODEL ONLY) The Service Video Out panel contains a power indicator and test monitor connection for ease of adjusting the camera settings during installation. VIDEO OSD OUTPUT CABLE TEST MONITOR AIR3026HG The power indicator LEDs display the power supply being fed into the camera and whether it is too high, low or correct.
-
Page 9: White Balance
LENS LENS MANUAL EXPOSURE SHUTTER AUTO, FLK, 1/100000 ~ X256 BRIGHTNESS 0 - 100 OFF / LOW / MIDDLE / HIGH SENSE UP AUTO X2 ~ X256 GAIN LOW / MIDDLE / HIGH LEFT / RIGHT WIDTH TOP / BOTTOM HEIGHT RETURN HSBLC LEVEL... - Page 10 DAY NIGHT AUTO DELAY 0 - 63 S-LEVEL 0- 100 E-LEVEL 0 - 100 RETURN BURST OFF / ON COLOUR RETURN 3DNR LEVEL 0-100 RETURN RETURN SPECIAL CAM TITLE OFF / ON D-EFFECT FREEZE OFF / ON MIRROR OFF / MIRROR / V-FLIP / ROTATE D-ZOOM D-ZOOM X1.0 ~ 32.0...
-
Page 11: Osd Factory Default Settings
ADJUST SHARPNESS 0 - 31 BLUE 0 - 100 0 - 100 RETURN RESET FACTORY RETURN OSD FACTORY DEFAULT SETTINGS FUNCTION STATUS WHITE BALANCE EXPOSURE SHUTTER AUTO DAY/NIGHT AUTO BRIGHTNESS 3DNR MIDDLE LEVEL SENS-UP ADJUST SHARPNESS BLUE D-WDR... - Page 12 AIR CAMERA RANGE AIR15 Range 18 IR LEDs 420 TVL / 520 TVL Options 3.6mm / 6mm Fixed Lens Options 182 x 70 x 81mm (WxHxD) AIR45 / 50 Range 60 IR LEDs Varifocal Lens Options Service Video Output Option On Screen Display Option External Lens / Zoom Adjustments 340 x 219 x 100mm (WxHxD)
- Page 13 ITEM AIR3016 AIR3026 AIR3026HG Type Colour/Monochrome (Removable IR Cut Filter) Signal System Pick Up Device 1/3" Sony Colour CCD 1/3" Sony Colour 1/3" Sony Colour High Resolution CCD High Resolution CCD Picture Elements 537 (H) × 597 (V) 795H×596V 795H×596V...
Need help?
Do you have a question about the AIR3016 and is the answer not in the manual?
Questions and answers