Page 1
AIR8010-AHD-Z Concept Pro 2MP AHD 10x Motorised Zoom Bullet Camera USER MANUAL AIR8010-AHD-Z...
Page 2
PLEASE FOLLOW THE ABOVE PRECAUTIONS – FAILURE TO DO SO MAY INVALIDATE THE WARRANTY OR CAUSE SERIOUS INJURY. Note: Changes or modifications not expressly approved by the manufacturer can cause the camera to be damaged and become inoperable. This may invalidate the user warranty. AIR8010-AHD-Z...
The Concept Pro AIR8010-AHD-Z is a weatherproof IR camera, suitable for monitoring areas in hostile conditions and in low light. Fixing Bolt for Sunvisor Tri- Axis Points Pre-Bolt on IR Lamps 12V DC Connector Photo Sensor Video Out Connector Sunvisor...
Check the power supply is correct and connect it to the power port on the Camera. Troubleshooting Ensure all connections to the camera, DVR and monitor are correct. If a picture still cannot be obtained please contact your supplier for technical support. AIR8010-AHD-Z...
Page 5
POSITIONING Point the Camera towards the area to be monitored. AIR8010-AHD-Z...
DVR ZOOM/FOCUS FROM DVR The AIR8010-AHD-Z is an a coaxitron controlled zoom camera with auto focus. There are no manual zoom or focus controls, the camera uses Up the Coax (UTC) control protocol which sends the zoom commands via the coax cable.
Need help?
Do you have a question about the AIR8010-AHD-Z and is the answer not in the manual?
Questions and answers