First Time Installation; Receiver Settings; Channel Scan; Advanced Menu Protection (Hotel Function) - Tele System TS6211DT User Manual

3

First time installation

When all the connections on the receiver are ready (section 2.2) and the main lead is plugged in, the
receiver will start up automatically. If this does not happen, press the ON button on the front panel of the
receiver or on the remote control. A easy installation menu will be displayed where you can set different
parameters and then run the channel scan:
1. OSD Language: Use the arrow
(OSD). Press to go to the next parameter.
2. Region: Use the arrow
CAUTION
If the wrong country is selected the channel scan may not detect all the channels available.
3. LCN Mode: When the Logical Channel Numbering option is active, the channels will be positioned in the
list with the broadcaster order automatically after the scanning. Press
NOTA
If the LCN Mode is turn on, we suggest to not change the channel positions in the TV/Radio Channel List menu.
4. Tuner Setting (Antenna Power): If you have an active antenna press
necessary when, for instance, an indoor amplified antenna that is powered by the receiver.
ATTENTION
With a traditional antenna, like typical rooftop models, or an independently powered antenna, the antenna power option
must be set to off: RISK OF OVERLOAD.
5. Auto Scan: Press OK to start the automatic channel scan. When the scan is completed, the receiver will
enter the viewing mode.
6. Time Setting: As last, please check and set properly the receiver time, such as the Summer Time
option (section 4.4).

4 Receiver settings

The first time installation procedure (chapter 3) will allow the receiver to be used with its basic functions.
However the receiver offers many more advanced features and options that are illustrated in the following
sections.
4.1 Password
To modify some settings and view certain channels locked by the end-user in the Channel menu, a
password has to be entered. The factory set password is "0000" (four zeros) but it can be changed by
pressing MENU and selecting the Setup menu and then Parental Lock.
CAUTION
Take note and keep the new password in a safe place. If you forget your personal password, use the universal code
"3327" to access the Parental Lock menu and set a new Password.

4.2 Advanced Menu Protection (Hotel Function)

The Hotel Function is a hidden utility, which consists in an advanced protection of the receiver. It allows to
enter the menu through password and disable some buttons of the remote control.
In order to enable/disable that function, press MENU and input the password (par. 4.1) using the numerical
buttons of the remote control.

4.3 Channel scan

The first time guided installation procedure runs a channel scan and saves any channels available at that
time. However later scans may become necessary if, for instance, a new channel becomes available or
when an existing channel changes frequency. To access the channel scan function from the viewing mode,
press MENU on the remote control to open the main menu, select Installation and then one of the following
options:
1. Auto Scan: an automatic scan of all digital terrestrial channels received in the area by your antenna.
Press OK on Search to start the scan.
CAUTION
When a new automatic scan is run, the existing channel list will be lost.
2. Channel Scan (for expert users): set all the parameters displayed on video related to the interested
channel, then select Search and press OK.
/ buttons to select a language for the On Screen Display menu
/ buttons to select your Country. Press
TS6211 DT
to proceed.
to go forward.
/ to power the antenna, this is
5