Front Panel; Back Panel And Connections; Product Description And Connections - Tele System TS6211DT User Manual

2 Product description and connections

2.1 Front panel

1. ON / Stand-by button.
2. LED status indicator: GREEN: ON status / RED: Stand-by status.
3. CHANNEL Next channel button.
4. CNANNEL Previous channel button.
5. IR Infrared sensor for remote control.

2.2 Back panel and connections

CAUTION
x
It is good practice to connect the receiver with other appliances (e.g. TV, VCR, HI-FI, etc.) and the
antenna before plugging in the mains lead. When the receiver is powered electrical voltage differences
may be created when plugging in the jacks, which may generate currents that could damage the
appliances.
x
The direct TV SCART connection should always be used as a first operating test, since other more
complex connection sequences may give malfunctions that are not caused by faults or defects of the
actual appliances but by problems of incompatibility.
1. RF IN Antenna input.
2. RF LOOP THROUGH Antenna TV loop through output.
3. Digital Audio Coaxial Digital Audio output for home-theatre amplifier.
4. TV TV SCART connection
5. VCR Video recorder SCART connection
6. RS232 RS232 serial port (for service's applications)
7. AC ~ Mains lead for 230 Volt AC, 50Hz
TS6211 DT
3