First Time Installation; Receiver Settings; Channel Scan - Tele System TS6201DT User Manual

3

First time installation

When all the connections on the receiver are ready (section 2.2) and the main lead is plugged in, the
receiver will start up automatically. If this does not happen, press the ON button on the front panel of the
receiver or on the remote control. A welcome menu will be displayed where you can set the menu and audio
languages (point 1), the parameters (points 2 and 3) required to run the channel scan (point 4):
1. OSD Language: Press button 1 on the remote control and use the arrow buttons to select a language
for the On Screen Display menu (OSD) and the main and secondary audio languages that the receiver
will use for channels transmitting in multiple audio. Press MENU to return to the previous page.
CAUTION
If the selected audio language is not being transmitted, the receiver will use the language set by the broadcaster.
2. Region: Press 2 and use the arrow buttons to select your country. Press MENU to quit.
CAUTION
If the wrong country is selected the channel scan may not detect all the channels available.
3. Tuner Power: If you have an active antenna press 3 to power the antenna, this is necessary when, for
instance, an indoor amplified antenna that is powered by the receiver.
ATTENTION
With a traditional antenna, like typical rooftop models, or an independently powered antenna, the antenna power option
must be set to off: RISK OF OVERLOAD.
4. Auto Scan: Press 4 and then confirm to start the automatic channel scan. When the scan is completed
confirm the results and quit the menu by pressing MENU or EXIT to enter the viewing mode.
CAUTION
The receiver use as default the logical channel numbering (LCN). Therefore, after the scanning, the channels will be
positioned in the list with broadcaster order.
If the user needs to disable that function, please enter the menu Setup / TV System and change LCN Mode option.

4 Receiver settings

The first time installation procedure (chapter 3) will allow the receiver to be used with its basic functions.
However the receiver offers many more advanced features and options that are illustrated in the following
sections.
4.1 Password
To modify some settings and view certain channels (if locked under the Channel menu) a Password has to
be entered. The factory set password is "0000" (four zeros) but it can be changed by pressing MENU and
selecting the Setup menu and then Parental Lock.
CAUTION
Take note and keep the new Password in a safe place. If you forget your personal password, use the universal code
"3327" to access the Parental Lock menu and set a new password.

4.2 Channel scan

The first time guided installation procedure automatically runs a channel scan and saves any channels
available at that time. However later scans may become necessary if, for instance, a new channel becomes
available or when an existing channel changes frequency. To access the channel scan function from the
viewing mode, press MENU on the remote control to open the main menu, select Installation and then one
of the following options:
1. Auto Scan: an automatic scan of all RF digital terrestrial channels received in the area by your antenna.
Press OK to start the scan.
CAUTION
When a new automatic scan is run, the existing channel list will be lost.
2. Channel Scan (only for expert users): set all the parameters related to the interested RF channel and
displayed on video, then select Search and press OK.
TS 6201 DT
5