Product Description And Connections; Front Panel; Back Panel And Connections - Tele System TS6201DT User Manual

2 Product description and connections

2.1 Front panel

1. ON / Stand-by (ST.BY) button
2. LED status indicator: GREEN: ON status / RED: Stand-by status
3. CHANNEL Next channel button
4. CNANNEL Previous channel button
5. IR Infrared sensor for remote control

2.2 Back panel and connections

CAUTION
It is good practice to connect the receiver with other appliances (e.g. TV, VCR, HI-FI, etc.) and the antenna before
plugging in the mains lead. When the receiver is powered electrical voltage differences may be created when
plugging in the jacks, which may generate currents that could damage the appliances.
The direct TV SCART connection should always be used as a first operating test, since other more complex
connection sequences may give malfunctions that are not caused by faults or defects of the actual appliances but by
problems of incompatibility.
1. RF IN Antenna input
2. RF LOOP THROUGH Antenna TV loop through output
3. Digital Audio Coaxial Digital Audio output for home-theatre amplifier
4. TV SCART TV Scart connection
5. VCR SCART Video recorder Scart connection
6. RS232 RS232 serial port (do not use – service only)
7. AC ~ Mains lead for
230 Volt AC, 50Hz
TS 6201 DT
3