Slbv-35 Log Placement - Superior SLBV 35 Care And Operation Instructions Manual

SUPERIOR
3
Left Rear Log
1
Left Front Log
Left Rear Brackets
Left Front Brackets Glowing Embers
(Do not place Glowing Embers over burner slots.)
Step 1
Position on the left
3
rear log brackets
1
Step 3
Figure 9
B-VENT GAS FIREPLACES • MODELS SLBV-35, SLBV-40 • CARE AND OPERATION INSTRUCTIONS
®
SLBV-35 LOG PLACEMENT INSTRUCTIONS
4
Right Rear Log
2
Right Front Log
Right Rear Bracket
Right Front Brackets
Right Front Log "Nub"
2
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
NOTE:
• Ceramic fiber logs are FRAGILE! Handle carefully to prevent breakage.
• Install volcanic stone and glowing embers BEFORE installing logs.
• To prevent sooting, make sure logs do not cover any burner openings.
SLBV Firebox Accessories/Parts
Cat. No. Model No.
H7244 - SLBV-35 Log Set Assembly
88L53 FGE Bag of Glowing Embers (rockwool)
80L42 FDVS Bag of Decorative Volcanic Stone
Position the individual logs as shown below. Logs should be placed
in the order shown. Position the rear log on the brackets at the
rear of the firebox with the log's notches directly over the brackets.
Proper log and twig placement is critical to encourage outstanding
flame appearance and prevent sooting.
Align hole at the bottom of left front log (1) over the left front
brackets and the right front log over the right front brackets.
1
Step 2
Align the hole at the bottom of log (4)
over the "nub" of log (2) as shown.
Step 4
Description
2
4
2
13