Log Placement - Superior B-500CEN Homeowner's Care And Operation Instructions Manual

Log Placement

WARNING: LOGS GET VERY HOT AND
WILL REMAIN HOT UP TO ONE HOUR
AFTER GAS SUPPLY IS TURNED OFF.
HANDLE ONLY WHEN LOGS ARE COOL.
TURN OFF ALL ELECTRICITY TO THE
APPLIANCE BEFORE YOU INSTALL
GRATE AND LOGS.
WARNING: THIS APPLIANCE IS NOT
MEANT TO BURN WOOD. ANY AT-
TEMPT TO DO SO COULD CAUSE IR-
REPARABLE DAMAGE TO YOUR AP-
PLIANCE AND PROVE HAZARDOUS TO
YOUR SAFETY.
WARNING: THE SIZE AND POSITION
ON THE LOG SET WAS ENGINEERED
TO GIVE YOUR APPLIANCE A SAFE,
RELIABLE AND ATTRACTIVE FLAME
f i r e - p a r t s . c o m
PATTERN. ANY ATTEMPT TO USE A
DIFFERENT LOG SET IN THE FIREPLACE
WILL VOID THE WARRANTY AND WILL
RESULT IN INCOMPLETE COMBUS-
TION, SOOTING, AND POOR FLAME
QUALITY.
Glowing Embers (Rockwool) Placement
Refer to the detailed glowing embers
placement instructions provided in the
LOG PLACEMENT GUIDE accompanying
this document.
Decorative Volcanic Stone Placement - See
Figures 12, 13 and 14.
Spread this Decorative Volcanic Stone evenly
over the bottom surface of the appliance fire-
box bottom plate as desired to achieve an
esthetically pleasing appearance. For best re-
sults, spread in a non-uniform manner while
ensuring complete coverage of the black sheet-
metal surface.
Note: Do Not place decorative volcanic stone
on top of the gas burner where it will block the
burner ports.
Carefully position the ceramic fiber logs and twigs over the burner as shown in Figures 12 (B-500),
13 (B-600) or 14 (B-800) . For more detailed placement instructions, refer to the LOG
PLACEMENT GUIDE accompanying this document.
Proper twig placement is critical to prevent sooting. Twigs should be placed in the gaps between
the flame peaks and should be positioned so that at no time they impinge the flames.
(Fire shown with optional Brick Liner Kit)
Figure 12
Figure 13
(Fire shown with optional Brick Liner Kit)
Figure 14
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.
B-500 MODEL
B-600 MODEL
B-800 MODEL
9