Choice Of Location; Proper Use; General Comments Regarding Choice Of Location - Fronius Galvo Operating Instructions Manual

Choice of location

Proper use

The solar inverter is intended exclusively to convert direct current from solar modules into
alternating current and to feed this into the public grid.
Utilisation not in accordance with the intended purpose comprises:
-
-
-
Fronius shall not be liable for any damage resulting from such action.
No warranty claims will be entertained.
Proper use includes:
-
-
-
When designing the photovoltaic system, ensure that all of its components are operated
within their permitted operating ranges at all times.
Observe all the measures recommended by the solar module manufacturer to ensure the
lasting maintenance of the properties of the solar module.
Obey the regulations of the energy supply company regarding feeding energy into the grid.
General com- The following criteria should be taken into account when choosing a location for the invert-
ments regarding er:
choice of location
Install only on a solid surface
If the inverter is installed in a switch cabinet or a similar sealed area, then forced-air ven-
tilation must be provided to ensure adequate heat dissipation.
If the inverter is to be installed on the outer wall of a cattle shed, maintain a minimum all-
round clearance of 2 m between the inverter and all ventilation and other openings in the
building.
The installation location must not be exposed to ammonia, corrosive vapours, salts or ac-
ids.
utilisation for any other purpose or in any other manner
making any modifications to the inverter that have not been expressly approved by
Fronius
the installation of parts that are not distributed or expressly approved by Fronius.
carefully reading and obeying all the instructions and all the safety and danger notices
in the operating instructions
performing all stipulated inspection and maintenance work
installation as specified in the operating instructions
Max. ambient temperatures:
-25 °C / +50 °C
Relative humidity:
0 - 100 %
The airflow within the inverter is
from the left to the top (cold air
taken in from the left, hot air dis-
sipated out of the top).
7