Selectype Operation - Epson DLQ-3000+ Service Manual

DLQ-3000+

1.5.2.2 SelecType Operation

SelecType 1 and 2 operations
Step 1. Selecting the feature
When the SelecType 1 or 2 starts, the first feature appears on the LCD. Scroll the
features by pressing the "
appears. Then press the "
feature is displayed.
Step 2. Keeping/Changing the option
The current option marked with "*" for the menu appears. To keep the option as it is,
press the "

press the " " (next) or "

" " (enter) button to fix the desired option. If the "Other" is selected, another option
menu appears. In this case, select the desirable option in the above mentioned way.
Step 3. Return to the previous menu
Press the "
several times to return to the SelecType 1 or 2 entry state.
Step 4. Exit
Press the "SelecType" button to exit the SelecType phase. With this operation, new
settings are automatically stored in the EEPROM and are effective until they are
changed again. This process is automatically followed by the SelecType initialization
phase and the printer returns to the stand-by status.
[Initializing all settings to the standard]
Select "Standard Setting" in the SelecType 2 menu. The message "Ready?" is
displayed. Then perform one of the followings:


To execute the initialization:
Press the "
returns to the feature menu.


To return to the feature menu without executing the initialization
Press the "
Press the "SelecType" button to exit the SelecType mode.


Font and Pitch Select Operation
Step 1. Displaying the current selection for the font/pitch
When the printer enters the Font/Pitch phase, the current option marked with "*"
appears.
Step 2. Changing the font/pitch

Press the " " (next) or "

press the "
with "*" as the result.
Step 3. Exit
Press the "SelecType" button to exit the Font/Pitch phase.
1-42

" (next) or "

" (enter) button, and the option menu for the selected
" button (escape) to return to the feature menu. To change the option,

" (previous) button to scroll the option menu. Then press the
" button (escape) to return to the previous menu. Pressing the button
 
" (enter) button. (All settings are reset to the standard and the printer
" button (escape).

" (previous) button until the desired font/pitch appears. Then
" (enter) button to fix the selection. The selected font/pitch is marked

" (previous) button until the desired feature
Rev. A