C124 Psb/Pse Board Removal - Epson DLQ-3000+ Service Manual

3.2.2.3 C124 PSB/PSE Board Removal

Step 1) Remove the rear cover. (See Section 3.2.2.1.)
Step 2) Remove 2 screws (CBS, 3X6) securing the power supply board and the C124
PSB/PSE board to the shield plate.
Step 3) Disconnect all harnesses one by one from the connectors on the C124 PSB/PSE
board as taking out the C124 PSB/PSE board on the power supply frame gradually,
then remove the C124 PSB/PSE board.
Rev. A
S h i e l d P l a t e
P o w e r s u u p l y F r a m e
Figure 3-7. C124 PSB/PSE Board Removal
Disassembly and Assembly
C 1 2 4 P S B / P S E B o a r d
C B S S c r e w s ( 3 X 6 )
3-9