External Monitor - Toshiba NB520 User Manual

8.
9.
Take care to ensure that the memory module cover is firmly closed.
10. Install the battery pack.
11. Turn your computer over.

External monitor

Some models are equipped with an external monitor port.
An external analog monitor can be connected to the external monitor port
on the computer. To connect a monitor, follow the steps as detailed below:
Connecting the monitor cable
1.
User's Manual
Grasp the module by its edges and remove it from the computer.
If you use the computer for a long time, the memory modules and the
circuits locating close to the memory modules will become hot. In this
case, let them cool to room temperature before you replace them. Or
you will get burnt if you touch any of them.
Do not touch the connectors on the memory module or on the
computer. Debris on the connectors may cause memory access
problems.
Figure 3-14 Removing the memory module
1
1
1. Latches
Seat the memory module cover in place and secure it with the screw.
Turn the computer's power off.
NB500/NB520/NB550D
3-22