Starting Up For The First Time; Turning Off The Power; Shut Down Mode; Sleep Mode - Toshiba NB520 User Manual

Starting up for the first time

The Windows 7 Startup Screen will be the first screen displayed when you
turn on the power. Follow the on-screen instructions on each screen in
order to properly install the operating system.
When it is displayed, be sure to read the Software License Terms
carefully.

Turning off the power

The power can be turned off in one of three modes, either Shut Down
Mode, Hibernation Mode or Sleep Mode.

Shut Down Mode

When you turn off the power in Shut Down Mode no data will be saved and
the computer will boot to the operating system's main screen the next time
it is turned on.
1.
2.
3.
4.
Do not turn the computer or peripheral devices back on immediately - wait
a short period to avoid any potential damage.

Sleep Mode

If you have to interrupt your work, you are able to turn off the power without
exiting from your software by placing the computer into Sleep Mode. In this
mode data is maintained in the computer's main memory so that when you
turn on the power again, you can continue working right where you left off.
When you have to turn off your computer aboard an aircraft or in places
where electronic devices are regulated or controlled, always completely
User's Manual
If you have entered data, either save it to the hard disk drive or to
other storage media.
Make sure the Hard Disk Drive/Memory media slot indicators are
off. If you turn off the power while a disk (disc) is being accessed, you
may lose data or damage the disk.
Never turn off the power while an application is running. Doing so
could cause loss of data.
Never turn off the power, disconnect an external storage device or
remove storage media during data read/write. Doing so can cause
data loss.
Click Start.
Click the Shut down button (
Turn off any peripheral devices connected to your computer.
NB500/NB520/NB550D
).
1-6