Toshiba NB520 User Manual page 22

Benefits of Hibernation Mode
The Hibernation Mode feature provides the following benefits:
Starting Hibernation Mode
You can also enable Hibernation Mode by pressing FN + F4 - please refer
to the
details.
To enter Hibernation Mode, follow the steps below.
1.
2.
Automatic Hibernation Mode
The computer can be configured to enter Hibernation Mode automatically
when you press the power button or close the lid. In order to define these
settings, you can follow the steps as described below:
1.
2.
3.
4.
5.
Data save in Hibernation Mode
When you turn off the power in Hibernation Mode, the computer will take a
moment to save the current data in memory to the hard disk drive. During
this time, the Hard Disk Drive/Memory media slot indicator will glow.
After you turn off the computer, and the content of memory has been saved
to the hard disk drive, turn off the power to any peripheral devices.
Do not turn the computer or devices back on immediately. Wait a moment
to let all capacitors fully discharge.
User's Manual
Saves data to the hard disk drive when the computer automatically
shuts down because of a low battery condition.
You can return to your previous working environment immediately
when you turn on the computer.
Saves power by shutting down the system when the computer
receives no input or hardware access for the time period set by the
System Hibernate feature.
Allows the use of the panel power off feature.
Hot key functions
Click Start.
Point to the arrow icon (
the menu.
Click Start and click the Control Panel.
Click System and Security and click Power Options.
Click Choose what the power buttons do or Choose what closing
the lid does.
Enable the desired Hibernation Mode settings for When I press the
power button and When I close the lid.
Click the Save changes button.
section in Chapter 3, Operating Basics, for further
) and then select Hibernate from
NB500/NB520/NB550D
1-9