Settings For Display Video On Hdmi - Toshiba NB520 User Manual

2.
1
1. HDMI cable
When connecting or disconnecting an HDMI device to or from the
computer, only do so when the computer is turned on or when the
computer is completely turned off. Do not do so when the computer is in
Sleep Mode or Hibernation Mode.

Settings for display video on HDMI

To view video on the HDMI device, be sure to configure the following
settings otherwise you may find that nothing is displayed.
Be sure to use the FN + F5 HotKey to select the display device before
starting to play video. Do not change the display device while playing
video.
Do not change the display device under the following conditions.
Select HD Format
To select the display mode, follow the steps as detailed below:
1.
User's Manual
Plug the other end of the HDMI cable into the HDMI out port on your
computer.
Figure 3-16 Connecting the HDMI out port
When you connect a television or external monitor to the HDMI port
and the display output device is set to HDMI. When you unplug the
HDMI cable and re-plug it in please wait at least 5 seconds before you
replug the HDMI cable again.
When you connect a television or external monitor to the HDMI port
and you connect the television, external monitor or external sound
device to another port. When you change the display output or
Unplug/re-plug the HDMI cable. The sound output device and the
display output device maybe changed automatically by the system.
While data is being read or written.
While communication is being carried out.
Click Start and click Control Panel.
2
2. HDMI out port
NB500/NB520/NB550D
3-24