Accessing Hw Setup; Hw Setup - Toshiba NB520 User Manual

1.
2. At this point, the hotkeys FN + F1 to F12 do not work. They will function
after you enter the password.
3.
4.
If you enter the password incorrectly three times in a row, the computer
shuts off. In this case, you must turn the computer back on to retry
password entry.

HW Setup

This section explains how to use the TOSHIBA HW Setup program to
configure your computer, and provides information on settings for various
functions.

Accessing HW Setup

To run the HW Setup program, click Start -> All Programs -> TOSHIBA ->
Utilities -> HWSetup.
HW Setup window
The HW Setup window contains a number of tabs (General, Password,
Display, Boot Priority, Keyboard, LAN, SATA and USB) to allow specific
functions of the computer to be configured.
In addition there are also three buttons : OK, Cancel and Apply.
OK
Cancel
Apply
General
This window displays the BIOS/EC version and contains two buttons :
Default and About.
Default
About
User's Manual
Turn on the power as described in Chapter 1,
following message will appear in the screen:
Enter Password [ ]
Enter the Password.
Press ENTER.
Accepts your changes and closes the HW Setup
window.
Closes the window without accepting your
changes.
Accepts all your changes without closing the HW
Setup window.
Return all HW Setup values to the factory
settings.
Display the HW Setup version.
NB500/NB520/NB550D
Getting Started. The
4-10