Toshiba NB520 User Manual page 103

Problem
The on-screen
pointer moves too
fast or too slow
The reaction of
Touch pad is either
too sensitive or not
sensitive enough.
USB mouse
Problem
On-screen pointer
does not respond to
mouse operation
User's Manual
Procedure
In this instance, you should initially try changing
the speed setting within the Mouse Control utility.
1. To access this utility, click Start -> Control
Panel -> Hardware and Sound -> Mouse.
2. Within the Mouse Properties window, click the
Pointer Options tab.
3. Set the pointer speed as required and click
OK.
Adjust the touch Sensitivity.
1. Click Start -> Control Panel -> Hardware
and Sound -> Mouse.
2. Within the Mouse Properties window, click the
Device Settings tab.
3. Select the TouchPad in the Devices list and
click the Settings... button.
4. Click Pointing -> Sensitivity -> Touch
Sensitivity.
5. Move the slider bar to adjust the sensitivity in
theTouch Sensitivity.
6. Click the OK button.
7. Click the OK button on the Device Settings
screen.
If you are still unable to resolve the problem,
contact your reseller, dealer or service provider.
Procedure
In this instance the system might be busy - Try
moving the mouse again after waiting a short
while.
Remove the mouse from the computer and then
reconnect it to a free USB port it in order to ensure
it is firmly attached.
NB500/NB520/NB550D
6-10