Removing A Memory Media; Additional Memory Module - Toshiba NB520 User Manual

1. Memory media slot

Removing a memory media

The following instructions apply to all types of supported media devices. To
remove a memory media, follow the steps as detailed below:
1.
2.
3.

Additional memory module

You can replace with an additional memory into the computer in order to
increase the amount of system memory that is available. This section
describes how to install and remove optional memory modules.
User's Manual
Figure 3-10 Inserting a memory media
Make sure memory media is oriented properly before you insert it. If
you insert the media in wrong direction, you may not be able to
remove it.
When inserting memory media, do not touch the metal contacts. You
could expose the storage area to static electricity, which can destroy
data.
Do not turn the computer off or switch to Sleep Mode or Hibernation
Mode while files are being copied - doing so may cause data to be
lost.
Open the Safely Remove Hardware and Eject Media icon on the
Windows Taskbar.
Point to memory media and click the left Touch Pad control button.
Grasp the media and remove it.
Make sure the Memory Media slot indicator is out before you remove
the memory media or turn off the computer's power. If you remove the
memory media or turn off the power while the computer is accessing
the memory media, you may lose data or damage the media.
Do not remove the memory media while the computer is in Sleep or
Hibernation Mode. The computer could become unstable or data in
the memory media could be lost.
1
2
2. Memory media
NB500/NB520/NB550D
3-17