Energy Saving; Clock Functions - AEG BP8715001 User Manual

6.8 Energy saving

The appliance contains features
which help you save energy
during everyday cooking:
• Residual heat:
– When the heating function or pro-
gramme operates, the heating ele-
ments are deactivated 10 % earlier
(the lamp and fan continue to oper-
ate). For this feature to operate, the
cooking time must be longer than

7. CLOCK FUNCTIONS

7.1 Clock functions
Symbol
If you set the time for a clock function,
the time starts to count down after 5 sec-
onds.
If you use the clock functions Du-
ration
the appliance deactivates the
heating elements after 90 % of
the set time. The appliance uses
the residual heat to continue the
cooking procedure until the time
ends (3 - 20 minutes).
Setting the clock functions
1. Set a heating function.
2.
Press
display shows the necessary clock
function and the related symbol.
3.
Press
time. Press OK to confirm.
When the time ends, an acoustic sig-
nal sounds. The appliance deacti-
vates. The display shows a message.
Function
To set a countdown (max 2 h 30 min). This function
has no effect on the operation of the appliance.
You can also activate it when the appliance is off.
Minute Minder
Use
set the minutes and OK to start.
To set how long the appliance has to be in opera-
Duration
tion (max. 23 h 59 min).
To set the switch-off time for a heating function
End Time
(max. 23 h 59 min).
and End Time
again and again until the
or to set the necessary
30 minutes or you must use the
clock functions ( Duration , End
Time ).
– When the appliance is off, you can
use the heat to keep food warm.
The display shows the remaining
temperature.
• Cooking with the lamp off - Touch
and hold
vate the lamp during cooking.
• Eco functions - refer to " Heating
Functions ".
Description
to activate the function. Press
4. Press a sensor field to stop the sig-
nal.
• With Duration
Time
,
heating function and the tem-
perature first. Then you can set
the clock function. The appli-
ance deactivates automatically.
• You can use Duration
End Time
time if you want to automati-
cally activate and deactivate
the appliance at a given time
later.
• When you use the Core tem-
perature sensor (if applicable),
the Duration
Time
erate.
ENGLISH
for 3 seconds to deacti-
or
and End
you must set the
at the same
and End
functions do not op-
13
to
and