Using The Accessories - AEG BP8715001 User Manual

With some programmes turn
over the food after 30 minutes.
The display shows a reminder.

9. USING THE ACCESSORIES

WARNING!
Refer to the Safety chapters.
9.1 Core temperature sensor
The core temperature sensor measures
the core temperature of the meat. When
the meat is at the set temperature, the
appliance deactivates.
There are two temperatures to be set:
• The oven temperature.
• The core temperature.
Only use the core temperature
sensor supplied with the appli-
ance or genuine replacement
parts.
1. Put the tip of the core temperature
sensor into the centre of the meat.
2.
Activate the appliance.
3. Put the core temperature sensor
plug into the socket on the front of
the appliance.
The display shows the core tempera-
ture sensor symbol.
4.
Press or
onds to set the core temperature.
5. Set the oven function and, if neces-
sary, the oven temperature.
The appliance calculates an approxi-
mate end time. The end time is dif-
ferent for different quantities of
food, the set oven temperature (min-
imum 120 °C) and the operating
mode. The appliance calculates the
end time in approximately 30 mi-
nutes.
6. Make sure that the core temperature
sensor stays in the meat and in the
core temperature sensor socket dur-
ing the cooking.
7. If necessary, you can set a new core
temperature during the cooking. To
do this, touch
8. When the meat is at the set core
temperature, an acoustic signal
sounds. The appliance deactivates
automatically.
Touch a sensor field to stop the sig-
nal.
9.
Remove the core temperature sen-
sor plug from the socket . Remove
the meat from the appliance.
WARNING!
The core temperature sensor is
hot. There is a risk of burns. Be
careful when you remove the tip
and plug of the core tempera-
ture sensor.
ENGLISH
15
in less than 5 sec-
.