Table 36. Removal steps of system board and magnesium structure frame (continued)
When installing: When you replace the system board, attach thermal rubbers as shown in this figure. Depend on
the models you are servicing, the number of thermal rubbers are different. Check the thermal rubbers on the old
system board, and find duplicates of them in the new FRU package and apply them to the new system board.
2010 LCD bezel assembly
For access, remove this FRU:
•
"1010 Battery pack" on page 68
Table 37. Removal steps of LCD bezel assembly
Step
Screw cap
1
104
ThinkPad T510, T510i, and W510 Hardware Maintenance Manual
a
1
1
Screw (quantity)
M2.5 × 6 mm, wafer-head, nylon-coated (3)
b
c
1
Color
Black
Torque
0.392 Nm
(4.0 kgfcm)