Chapter 4. Related Service Information; Restoring The Factory Contents By Using Recovery Disc Set; Copyright Lenovo 2009, 2011 - Lenovo THINKPAD T510 Hardware Maintenance Manual

Chapter 4. Related service information

This chapter presents following information:
• "Restoring the factory contents by using Recovery Disc Set" on page 39
• "Passwords" on page 40
• "Power management" on page 42
• "Symptom-to-FRU index" on page 43
Service Web site:
When the latest maintenance diskette and the system program service diskette become available, they
will be posted on http://www.lenovo.com/support

Restoring the factory contents by using Recovery Disc Set

When the hard disk drive or solid state drive is replaced because of a failure, no product recovery program is
on the new drive. In this case, you must use the Recovery Disc Set for the computer. Order the Recovery
Disc Set and the drive at the same time so that you can recover the new drive with the pre-installed software
when they arrive. For information on which discs to order, see "Recovery discs" on page 196.
The recovery disc set consists of the user instructions and the following set of DVDs to restore the computer
to the original factory configuration.
Operating System Recovery Disc (one disc)
Applications and Drivers Recovery Disc (one or
more discs)
Supplemental Recovery Disc
Notes:
• You must have a DVD drive to use the recovery discs. If you do not have an internal DVD drive, you
can use an external USB DVD drive.
• During the recovery process, all data on the drive will be deleted. If possible, copy any important data
or personal files that you want to keep onto removable media or a network drive before you start the
recovery process.
To restore the computer to the original factory configuration using the recovery disc set, do the following:
Note: Recovery can take one to two hours to complete. The length of time depends on the method you use. If you
use recovery discs, the recovery process will take about two hours.
1. Make the CD/DVD drive the first startup device in the startup sequence using the following procedure:
a. Press and hold down the F1 key, and then turn on the computer. When the logo screen is displayed
or if you hear repeating beeps, release the F1 key. The Setup Utility program opens.
b. Use the arrow keys to select Startup ➙ Boot.
c. Select the CD/DVD drive as the 1st Boot Device.
2. Insert the Operating System Recovery Disc into the DVD drive.
© Copyright Lenovo 2009, 2011
This disc restores the Microsoft
system. Use this disc to start the recovery process.
This disc restores the preinstalled applications and
drivers on the computer.
This disc contains additional content, such as
updates to the software that was preinstalled on the
computer. Not all recovery disc sets come with a
Supplemental Recovery Disc.
®
Windows operating
39