Lenovo THINKPAD T510 Hardware Maintenance Manual page 98

Table 30. Removal steps of thermal module (continued)
When installing: Before you attach the fan assembly to the computer, apply thermal grease, at an amount of 0.2
grams, on the parts marked
cause a thermal problem due to imperfect contact with a component. For the new CPU thermal device/fan, you
need to peel the thin film off from the rubbers marked
For Switchable Graphics models:
92
ThinkPad T510, T510i, and W510 Hardware Maintenance Manual
6
a
as in the following figures. Either too much or too less application of grease can
a b
b
.
b
a
b