For access, remove these FRUs in order:
•
"1010 Battery pack" on page 68
•
"1020 Serial Ultrabay Enhanced device or travel bezel" on page 69
•
"1030 DIMM slot cover" on page 70
• "1050 Hard disk drive slot cover, hard disk drive and HDD rubber rails or solid state drive and storage
converter" on page 71
•
"1060 Keyboard" on page 73
•
"1080 PCI Express Mini Card for wireless LAN" on page 77
•
"1090 PCI Express Mini Card for wireless WAN" on page 79
•
"1100 Keyboard bezel assembly" on page 81
•
"1110 Bluetooth daughter card (BDC-2.1)" on page 84
•
"1120 Backup battery" on page 85
• "1130 Smart Card or Contactless Smart Card or Smart Card dummy spacer" on page 86
•
"1140 Speaker assembly" on page 89
•
"1150 Thermal module" on page 91
•
"1170 LCD unit" on page 94
•
"1180 Base cover assembly" on page 97
Table 34. Removal steps of I/O sub card
Step
Screw (quantity)
1
M2 × 7 mm, flat-head, nylon-coated (3)
When installing: Make sure that the connector is attached firmly.
1200 System board assembly and magnesium structure frame
Note: The system board does not contain neither the Ethernet port nor the modem port. See "1190 I/O
sub card" on page 99 for these ports.
For access, remove these FRUs in order:
•
"1010 Battery pack" on page 68
•
"1020 Serial Ultrabay Enhanced device or travel bezel" on page 69
•
"1030 DIMM slot cover" on page 70
•
"1040 DIMM (bottom slot)" on page 70
100
ThinkPad T510, T510i, and W510 Hardware Maintenance Manual
1
1
1
2
Torque
Color
Silver
0.181 Nm
(1.85 kgfcm)