Removing An Lcd Fru For Models Without Touch Panel; 2010 Lcd Bezel Assembly; 2020 Lcd Panel And Lcd Cable - Lenovo ThinkPad X1 Carbon Hardware Maintenance Manual

• "1060 Thermal fan" on page 60
• "1070 Audio card" on page 62
• "1080 Speaker assembly" on page 63
• "1090 RJ45 card" on page 64
• "1100 Fingerprint reader assembly" on page 65
• "1110 System board assembly and coin-cell battery" on page 66
• "1130 Adaptive Keys row" on page 70
• "1120 LCD unit" on page 68

Removing an LCD FRU for models without touch panel

This section provides instructions on how to remove an LCD FRU for models without touch panel.

2010 LCD bezel assembly

The LCD bezel assembly FRU for non-touch models consists of an LCD front sheet bezel and an LCD bezel.
Important: Once an LCD bezel assembly is removed, it cannot be used anymore. A new LCD bezel
assembly is required for replacement.
For access, remove these FRUs in order:
• "1010 Base cover assembly" on page 55
• "1020 Battery" on page 56
• "1030 Solid-state drive" on page 58
• "1040 Wireless LAN card" on page 59
• "1050 Wireless WAN card" on page 59
• "1060 Thermal fan" on page 60
• "1110 System board assembly and coin-cell battery" on page 66
Removal steps of the LCD bezel assembly
When installing: Ensure that all the latches are attached firmly.

2020 LCD panel and LCD cable

For access, remove these FRUs in order:
• "1010 Base cover assembly" on page 55
1
1
.
Chapter 7 Removing or replacing a FRU
73