Read Printer State; Read Direction Detection Values; Read Rfid Card Number; Reset Printer - Ana-U EasyPrinter S3 Programmer's Manual

EasyPrinter S3 Programmers Manual

Read printer state

Reads the printer state
Command:
[ESC] ?
Returns:
9 ASCII characters representing the printers state in 8 ASCII boolean format .
The return value is terminated with a [CR].
'0'... false
'1' ... true

Read direction detection values

Reads the calculated direction detection values
Command:
[ESC] #
Returns:
8 ASCII characters representing 4 decimal values (each 2 digits).

Read RFID card number

Command:
[ESC] §
Returns:
10 ASCII characters coding the UID card number.

Reset printer

Reset the printers actual state and data
Command:
[ESC] r [n]
[n] ... Resettype (ASCII characters '1', '2')
'1' ... Abort actual job, delete printer data, delete direction detection data
'2' ... delete printer data
Page 5 of 23 Version 1.3 - 19. April 2012