1. Manuals
  2. Brands
  3. Ana-U Manuals
  4. Printer
  5. EasyPrinter S3
  6. User manual

Ana-U EasyPrinter S3 User Manual

Card printer
Hide thumbs Also See for EasyPrinter S3:
Table of Contents

Advertisement

Quick Links

Download this manual
ANA-U GmbH
Moosgrabenstraße 32
8200 Gleisdorf
Austria
Tel: +43 3112 36841
Fax: +43 3112 57416
e-Mail: info@ana-u.com
ANA-U EasyPrinter S3

User Manual

Version: 1.4
Date:
Author: Stefan Strobl
© ANA-U 2012
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any
form or by any means, electronic, mechanical, photocopying, recording, translation or otherwise, without prior
permission in writing.
27. March 2012

Advertisement

Table of Contents
loading

Related Manuals for Ana-U EasyPrinter S3

Summary of Contents for Ana-U EasyPrinter S3

  • Page 1: User Manual

    ANA-U GmbH Moosgrabenstraße 32 8200 Gleisdorf Austria Tel: +43 3112 36841 Fax: +43 3112 57416 e-Mail: info@ana-u.com ANA-U EasyPrinter S3 User Manual Version: 1.4 Date: 27. March 2012 Author: Stefan Strobl © ANA-U 2012 All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, translation or otherwise, without prior permission in writing.

  • Page 3: Liability Statement

    The contactless smart card coupler emits radio-frequency waves and must be used as installed and recommended by ANA-U. You may not modify the coupler or how it is used without the written permission of ANA-U. You may not operate the printer after modifying the coupler or its method of operation.

  • Page 4: Table Of Contents

    Charging the hopper................9 User Interface...............10 Buttons...................10 LED Notifications................10 Navigation..................11 Submenus..................11 Printer Driver Installation........13 System Reqirements..............13 Installing the printer on a windows system.......13 ANA-U Printer SDK..........17 Installation................17 DemoTool................17 Components................18 Licensing................18 Software support..............18 Maintenance and Service.........19 Cleaning the printer...............19 Replacing the printhead............21 Errorcodes................23...

  • Page 5: General Information

    EasyPrinter S3 Users Manual General Information Introduction The ANA-U EasyPrinter is an industrial printer for ISO plastic cards, with TRW foil coating. It can be adjusted to variaous kinds of different TRW foils by adjusting the print energy settings. The industrial metal design is perfect for high end applications and kiosk usage.

  • Page 6: Contents Of Package

    EasyPrinter S3 Users Manual Contents of package 1. 1x EasyPrinter S3 2. 1x Power supply 3. 1x Power cord 4. 1x Serial cable (Crossover cable with RTS and DTS support!) 5. 1x USB cable 6. 1x Ethernet cable 7. 1x Weight for hopper standard (Hopper version only!)

  • Page 7: Options

    EasyPrinter S3 Users Manual Options Ordercode Productname Description 330383 Mifare encoding unit ACS ACR122 Contactless Reader with PC/SC interface ISO14443 Type A & B • Mifare 1K • Mifare 4K • Mifare Ultralight C • Mifare Plus • DESFire EV1 •...

  • Page 8: Technical Specifications

    Picture 2: Erase- and Printarea Compatible Card Systems The EasyPrinter S3 is an industrial printer for use with thermo-rewriteable ISO cards. Therefore it is possible to print and erase information onto the cards. Further more cards with contactless chip as well as contact chip can be modified electronically.

  • Page 9: Thickness Of Cards

    This device is made to process cards with thickness between 0.3 mm and 0.9 To ensure the quality of the TRW surface, we also recommend testing and approval of cards by ANA-U with about 50 card samples. Further card productions should be checked against those samples, to ensure the same quality and behaviour.

  • Page 10: Dimensions

    EasyPrinter S3 Users Manual Dimensions Parameter Value Unit Printer Length Printer Width Printer Height Hopper Length Hopper Width Hopper Height Printer Weight 4600 Page 6 of 25 Version 1.4 - 27. March 2012...

  • Page 11: Product Description

    EasyPrinter S3 Users Manual Product Description Front View Hopper User Interface Card Slot Card Tray BackView Serial Interface USB Interface Ethernet Interface Power Supply Power Switch Page 7 of 25 Version 1.4 - 27. March 2012...

  • Page 12: Open Cover

    EasyPrinter S3 Users Manual Open cover To open the cover, press buttons on both sides of the printer and flip cover. "OPEN" button Step 1: Press "OPEN" buttons Step 2: Flip cover to open Page 8 of 25 Version 1.4 - 27. March 2012...

  • Page 13: Adjust Hopper To Card Thickness

    EasyPrinter S3 Users Manual Adjust hopper to card thickness To ensure optimal card separation, the hopper has to be adjusted to the cards. To proceed, turn the lever to left or right, as shown. Picture 2: Lever in Middle Position Picture 1: Lever in Left Endposition Left Endposition: Max.

  • Page 14: User Interface

    EasyPrinter S3 Users Manual User Interface Buttons The buttons on the display are used to navigate through the menu and change printer settings. Icon Action "UP"-button. "DOWN"-button. "SELECT"-button. LED Notifications The LEDs indicate the printers working state. Definition LED is on: Printer in error mode.

  • Page 15: Navigation

    EasyPrinter S3 Users Manual Navigation To enter the menu from "Idle State", press the "SELECT"-button. To select the appropriate menu item, move the ">" sign to the menu item and press the select button. To change setting, move the ">" sign with the "UP"/"DOWN"-button to the menu item and press the select button.
  • Page 16 EasyPrinter S3 Users Manual Network Select if the networkdapter uses DHCP or STATIC IP adress. ##### NETWORK ###### DHCP ON/OFF STATIC IP > SET In case of STATIC IP the subnet mask has to SUBNETMASK > SET be configured too.

  • Page 17: Printer Driver Installation

    • 2. Connecting the printer to the PC Serial and Ethernet: Go on with Pt. 3 • USB: A printer is automatically added when the ANA-U EasyPrinter is • connected via USB. 3. Add serial printer to the system first.
  • Page 18 Step 6: Select the printers COM port uncheck "Plug and Play" then click (for Ethernet select a temporary one) "Next"... and click "Next"... Step 7: Select "ANA-U EasyPrinter" and Step 8: Name your printer and click click "Next"... "Next"... Page 14 of 25...
  • Page 19 EasyPrinter S3 Users Manual Step 9: Select "No" and click "Next"... Step 10: Click "Finish". Now the printer is ready to use! Step 11: Click "Continue Anyway"... 4. Change to Network printer If a serial printer is already installed, else follow the instructions at Pt. 3 first) Now change the interface to network, with the following actions: Step 12: At "printer and fax"...
  • Page 20 EasyPrinter S3 Users Manual Step 14: Select "ANA-U easyPrinter Step 15: Enter a name for the port and (TCP/IP)" and click on "New Port..." the IP-address of the printer, then click "OK" and close all other windows. Now the printer is installed and ready to...

  • Page 21: Ana-U Printer Sdk

    1. Download the ANA-U EasyPrinter Library 2. Start the Installation of EasyPrinterLibrarySetup_vx.x.x.x.exe 3. Follow the Wizard to select the Installation location and click "Next". 4. After the installation is done you can run the EasyPrinter S3 Demo program by checking the box "Run". DemoTool Picture 1: EasyPrinter S3 Demo The EasyPrinter S3 Demo shows how to use the ANA-U EasyPrinter Library.

  • Page 22: Components

    Licensing The ANA-U Printer SDK and all its included Libraries may be used free of charge together with an EasyPrinter S3. It is forbidden to use all or parts of it together with other printers or encoding units. The Dynamic Library "SmartCard.dll" must be used only in conjuction with PCSCMifareReader.dll and RF-Readers shipped by ANA-U GmbH.

  • Page 23: Maintenance And Service

    3 months. Appropriate cleaning materials for the maintnance and service of your printer are available at ANA-U or partners of ANA-U. WARNING: Using non approved cleaning materials may lead to damage or poor printer functionality.
  • Page 24 EasyPrinter S3 Users Manual Picture 3: Area to spray to 3. Insert Cleaning card into front card slot. Picture 4: Insert Cleaning card 4. Printer cleans itself. After the cleaningcycle, the printer ejects the cleaning card. Picture 5: Cleaning card in cleaning position 5.

  • Page 25: Replacing The Printhead

    EasyPrinter S3 Users Manual Replacing the printhead Warning and Safety Notice: 1. Some printer components are very hot. Ensure that you allow enough time to cool down those components after usage. 2. Do not open the printer without first disconnect it completely from the power supply.
  • Page 26 EasyPrinter S3 Users Manual 7. Pull off the printheads cable Picture 3: Unplug printhead cable 8. Remove the printhead to the left side. Picture 4: Remove printhead 9. Insert the new printhead. 10. Tighten screws and plug in printheads cable.

  • Page 27: Errorcodes

    EasyPrinter S3 Users Manual Errorcodes The printers errorcode is a 4 digit hexadezimal value. It is splitted in 2 value ranges: Values between 0x0001 and 0x7FFF are warnings. The printer will • continue working, but the quality of printing may be reduced due to the problem.

  • Page 28: Spare Parts

    EasyPrinter S3 Users Manual Spare Parts Contact adress: ANA-U GmbH Moosgrabenstraße 32 8200 Gleisdorf, AUSTRIA E-Mail Support: info@ana-u.com Website: http://www.ana-u.com Spare part and Support Hotline: +43 3112 368 41 Ordercode Productname 330376 Print- and Eraseunit 300 dpi, longlife coating 330377...
  • Page 29 The content of these instructions is not allowed to be duplicated, processed or translated in any form, either in its entirety or extracts thereof, without the written approval of the company ANA-U GmbH. All technical specifications, drawings, etc. are subject to the law relating to the protection of copyright. The manufacturer of the product reserves the right to make changes without previous notice.

Table of Contents