Arcam DV79 Handbook page 28

Status codes
The following status codes are defined:
MSB CODES:
n
n
n
n
n
n
n
n
n
LSB CODES:
n
n
n
n
n
n
n
Example command and response sequence
As an example, the command to be set the front-panel display of the DV79 to 'dimmed' (defined below)
is as follows:
STR
!
Assuming that the command was accepted by the DV79, the DV79 shall respond to this command with
the following sequence:
STR
!
DV79
E-28
Stand-by '0' (0x30):
Disc loading '1' (0x31):
Tray open '2' (0x32):
No disc '3' (0x33):
Stop '4' (0x34):
Resume stop '5' (0x35):
Play '6' (0x36):
Pause '7' (0x37):
Scanning '8' (0x38):
No menu '@' (0x40):
Setup 'A' (0x41):
Programme 'B' (0x42):
Bookmark 'C' (0x43):
Search 'D' (0x44):
Trim 'E' (0x45):
PLII 'F' (0x46):
CC P1 P2 ETR
+ 1 ~ (0xD)
RC AC P1 P2
+ @ 1 ~
The DV79 is in stand-by state.
A disc is being loaded by the DV79.
The disc tray is open.
There is no disc in the DV79.
Play-back of the disc is stopped.
The DV79 is in 'resume-stop' state.
The DV79 is playing the disc.
The DV79 is in 'pause' state.
Fast/slow forward/rewind in progress.
No player menu is open (DVD menus may be open).
The set-up menu of the DV79 is open.
The programme menu of the DV79 is open.
The bookmark menu of the DV79 is open.
The search menu of the DV79 is open.
The trim menu of the DV79 is open.
The Pro Logic II menu of the DV79 is open.
P3 ETR
~ (0xD)