Advanced Controls (Cr-415 - Arcam DV79 Handbook

Advanced controls (CR-415)

This button brings up a menu very similar to the 'Trims'
page in the Set-up menu (as described on page 18). It
allows on-the-fl y changes to the relative volume of each
speaker in your system, while a disc is being played.
Some DVDs offer the facility to select
different audio tracks. Press
through the available tracks.
The on-screen display shows the number,
language and type of audio track, e.g. '1 Eng
Press to enlarge a particular area
ZOOM
of the picture. Each press of the
button increases the zoom, normally until
a maximum of 4x enlargement is reached.
Pressing when the maximum
ZOOM
enlargement has been reached returns the
image to normal size.
While using the zoom function, the cursor
pad can be used to move around within
the image. The zoom function can also be
used when playback is paused.
Note that a zoom level of x1.25 is
particularly useful if the output from the
DVD player is in a screen format different
from that of your display device. A zoom
of x1.25 when a 'widescreeen' image is
displayed on a 4:3 display causes the bars
at the top and bottom of the screen to
disappear (although the sides of the image
are lost); a zoom of x1.25 when a 4:3
image is displayed on a widescreen display
causes the bars at the side of the image to
disappear (although the top and bottom of
the image are lost).
Press to toggle random playback
P MODE
Press
STATUS
remaining time of the disc. Press
time to give play status information about the
current disc. Press
The status information displayed varies depending
on the type of disc – DVD, CD or VCD.
TRIM
For a full description, see page 18.
AUDIO
to cycle
AUDIO
DD 6CH'.
ZOOM
ZOOM
AUDIO
ZOOM
P
MODE
P MODE
STATUS
once to show the elapsed and
a second
STATUS
a third time to close
STATUS
the status display.
SUBT (subtitle)
Press on the remote control to cycle through the
SUBT
available subtitle languages, including 'OFF'. Some discs
force subtitles on, over-riding player set up.
TITLE
Press to access the DVD's 'Title' menu. Note
TITLE
that this feature applies only to multi-title discs.
TRIM TITLE RTN
ANGLE SUBT PL
STATUS MEM SRCH
SRCH (search)
It is possible to get access to any point on
the disc directly using the 'Search' menu.
Press
MEM (memorise)
It is possible to 'bookmark' up to three points
on a DVD title, so you can jump quickly to
those parts of the title again (until the disc
is ejected or the player reset. Press
open the 'Bookmark' menu.
ANGLE
Some DVDs offer the facility to select different
camera angles. If this feature is available the
'camera' symbol lights in the display.
Press to cycle through the available
ANGLE
angles.
RTN (return)
Press to move back through the DVD
RTN
'Disc' and 'Title' menus. Note that this
feature is only of use with discs using
multi-level menus.
PL (PRO LOGIC)
This button brings up a menu very
similar to the 'Audio' page of the Set-
up menu (as described on page 15)
and allows the Pro Logic II settings
to be changed while the disc is being
played.
to access the 'Search' menu.
SRCH
to
MEM
DV79
E-11