Interface Cable - Brother HL-4040CN User Manual

Interface cable

The interface cable is not a standard accessory. Buy the appropriate cable for the interface you are going to
use.
USB cable
Do not use a USB interface cable that is longer than 6 feet (2.0 meters).
Do not connect the USB cable to a non-powered hub or a Macintosh
Make sure that you connect it to the USB connector of your computer.
Third party USB ports are not supported for Macintosh
Parallel cable (HL-4050CDN only)
Do not use a parallel interface cable that is longer than 6 feet (2.0 meters).
Use a shielded interface cable that is IEEE 1284-compliant.
Network cable
Use a straight-through Category5 (or greater) twisted-pair cable for 10BASE-T or 100BASE-TX Fast
Ethernet Network.
®
keyboard.
®
.
About this Printer
1
1
2