Brother HL-4040CN User Manual page 46

Media Type
You can use the following types of media in your printer. For the best print quality, select the type of media
that you wish to use.
Plain Paper Thin Paper
Env. Thick Env. Thin
Note
• When using ordinary plain paper (19 to 25 lb) choose Plain Paper. When using heavier weight paper,
envelopes or rough paper choose Thick Paper or Thicker Paper. For bond paper, choose Bond Paper.
• When you use envelopes, choose Envelopes. If the toner is not fixed to the envelope correctly when
Envelopes has been selected, choose Env. Thick. If the envelope is crumpled when Envelopes has
been selected, choose Env.Thin.
Duplex / Booklet (HL-4050CDN only)
When you want to print a booklet or do duplex printing, use this function, and then from the Advanced tab,
choose a Duplex Type (See Duplex printing on page 21).
Color/Mono
You can change the Color/Mono settings as follows:
Color
When your document contains color and you want to print it in color, select this mode.
Mono
Select this mode if your document has only black and grayscale text and/or objects. If your document
contains color, selecting Mono mode prints your document in 256 levels of gray.
Auto
The printer checks the content of your documents for color. If color is detected, it prints in color. If no color
content is detected, it prints in monochrome.
Note
If the Cyan, Magenta or Yellow toner runs out, choosing Mono will allow you to keep printing as long as
the Black toner does not run out.
Paper Source
You can choose Auto Select, Tray1, MP Tray or Manual and specify separate trays for printing the first page
and for printing from the second page onwards.
Thick Paper Thicker Paper
Recycled Paper Postcard
Driver and Software
Bond Paper Envelopes
Label
3
3
3
3
3
38