Default Settings - Brother HL-4040CN User Manual

Default settings

The printer settings have been set at the factory before shipment. They are called default settings (see Menu
table on page 77). Although you can run the printer with these default settings unchanged, you can tailor the
printer with user settings.
Note
Changing the user settings does not affect the default settings. You cannot modify the preset default
settings.
The changed user settings can be restored to the default settings with the Reset Menu. See Menu
table on page 77.
Note
• The emulation mode affects the setting.
• If you change Interface, Language, Reprint, Set Registration, then performing a factory reset
will not revert those settings back to the original factory default settings. Page counter can never be
changed.
Network default settings
If you want to reset the print server back to its default settings (resetting all information such as the password
and IP address information), follow these steps:
a
Press the + or - key to choose LAN. Press OK.
Select ab or OK
Machine Info.
h
Select ab or OK
LAN
b
Press the + or - key to choose Factory Reset. Press OK.
LAN
Factory Reset
c
Press OK again.
Factory Reset
OK?
Control Panel
4
4
4
86