Brother HL-4040CN User Manual page 86

Machine Info. (continued)
Submenu
Parts Life
Reset Parts Life
(Appears only when
replacement parts have been
changed)
Paper Tray
Submenu
Tray Use
Manual Feed
Priority
The default settings are shown in Bold with an asterisk.
Menu Selections
Drum Life
Belt Life
PF KitMP Life
PF Kit1 Life
PF Kit2 Life
(HL-4050CDN only)
Fuser Life
Laser Life
Drum Unit
Belt Unit
PF KitMP
PF Kit1
PF Kit2 (HL-4050CDN only)
Options
<HL-4040CN only>
Auto*/MP Only/Tray1 Only
<HL-4050CDN only>
(For no Tray2 installed)
Auto*/MP Only/Tray1 Only
(For Tray2 installed)
Auto*/MP Only/Tray1 Only/
Tray2 Only
Off*/On
<HL-4040CN only>
MP>T1*/T1>MP
<HL-4050CDN only>
(For no Tray2 installed)
MP>T1*/T1>MP
(For Tray2 installed)
MP>T1>T2*/MP>T2>T1>/T1>T2
>MP/T2>T1>MP/T1>T2/T2>T1
/T1>MP>T2/T2>MP>T1
Descriptions
Shows the remaining life for the drum unit.
Shows the remaining life for the belt unit.
Shows the pages left to print with the PF kit MP.
Shows the pages left to print with the PF kit 1.
Shows the pages left to print with the PF kit 2.
Shows the pages left to print with the fuser unit.
Shows the pages left to print with the laser unit.
Resets the drum unit life. Appears when you
replace the drum unit.
Resets the belt unit life. Appears when you replace
the belt unit.
Resets the PF kitMP parts life. Appears when you
replace the PF KitMP.
Resets the PF kit1 parts life. Appears when you
replace the PF Kit1.
Resets the PF kit2 parts life. Appears when you
replace the PF Kit2.
Descriptions
Chooses the tray that will be used.
Chooses whether to feed paper manually.
When Tray Use is chosen as Auto: Chooses the
order in which the printer uses the paper trays that
contain paper of the same size.
Control Panel
4
78