Brother HL-4040CN User Manual page 90

Print Menu (continued)
Submenu
BR-Script
(HL-4050CDN only)
The default settings are shown in Bold with an asterisk.
LAN
Submenu
TCP/IP
Ethernet
Factory Reset
The default settings are shown in Bold with an asterisk.
1
On connection to the network, if the machine's 'BOOT Method' is 'Auto' the machine will attempt to automatically set the IP address and Subnet
Mask from a boot server such as DHCP or BOOTP. If a boot server cannot be found, an APIPA IP address will be allocated, such as 169. 254.
[001-254]. [000-255]. If the 'BOOT Method' of the machine is set to 'Static' you will need to manually enter an IP address from the machine's control
panel.
Reset Menu
Display Shows
Reset Printer
Factory Reset
Menu Selections Options
Error Print On*/Off
CAPT Off*/On
Menu Selections Options
BOOT Method Auto*/Static/RARP/BOOTP
/DHCP
IP Address ###.###.###.###
(000.000.000.000)*
Subnet Mask ###.###.###.###
(000.000.000.000)*
Gateway ###.###.###.###
(000.000.000.000)*
# (3*)
IP Boot Tries
APIPA On*/Off
IPv6 On/Off*
Auto*/100B-FD/100B-HD/
10B-FD/10B-HD
Restores all network settings of the internal print server to default.
Description
Resets the printer and restores all printer settings (including command settings) to settings
you have previously made with the control panel buttons.
Resets the printer and restores the printer settings (including command settings) to the
default settings.
Descriptions
Descriptions
Choose the IP method that best suits
your needs.
Enter the IP address.
1
Enter the Subnet mask.
1
Enter the Gateway address.
Automatically allocates the IP
address from the link-local address
1
range.
Chooses Ethernet link mode.
Control Panel
4
82