Brother HL-4040CN User Manual page 60

Print Quality
You can choose the following print quality settings.
• Normal
600 dpi class. Recommended for ordinary printing. Good print quality with good print speeds.
• Fine
2400 dpi class. The finest print mode. Use this mode to print precise images such as photographs.
Since the print data is much larger than in normal mode, processing time, data transfer time and
printing time will be longer.
Toner Save
You can conserve toner using this feature. When you set Toner Save Mode to On, print appears
lighter. The default setting is Off.
Note
We do not recommend Toner Save for printing Photo or Gray Scale images.
Color/Mono
You can choose the following color mode:
• Color
The device will print all pages in full color mode.
• Mono
Selecting Mono mode prints your documents in grayscale.
Note
If the Cyan, Magenta or Yellow toner runs out, choosing Mono will allow you to keep printing as long as
the Black toner does not run out.
Gamma Correction
You can adjust the brightness of your printed document compared to the image on the screen.
Color Mode
The following options are available in Color Matching mode:
• Normal
This is the Default color mode.
• Vivid
The color of all elements are adjusted to become a more vivid color.
Improve Gray Color
You can improve the image of a shaded area.
Enhance Black Printing
If a black graphic cannot print correctly, choose this setting.
Driver and Software
3
52