Brother HL-4040CN User Manual page 139

d
Turn the drum unit gear toward you by hand while looking at the surface of the drum (1).
e
When you have found the mark on the drum that matches the print sample, wipe the surface of the drum
gently with a cotton swab until the dust or paper powder on the surface comes off.
CAUTION
DO NOT clean the surface of the photosensitive drum with a sharp object.
f
Turn the drum unit gear toward you by hand to return it to the home position. The home position of each
drum can be identified by matching the number on the drum unit gear to the same number on the side
of the drum unit as shown in the illustration. Make sure that the number on each of the four drum unit
gears matches the corresponding number on the side of the drum unit.
g
Using the green handles turn the drum unit back over.
h
Put all the toner cartridges back in the drum unit and put the drum unit in the printer. See steps f to h
on page 106-107.
1
Routine Maintenance
6
131