Confi Guring Your Dvd Player; Introduction; Switching On; Obtaining A Tv Picture - Arcam DV27 Handbook

Confi guring your DVD player

INTRODUCTION

Congratulations – if you have followed the installation instructions
then the required connections to other equipment will have been
made. It is now essential to go through an initial set up procedure to
ensure the DVD player is configured correctly for use.

SWITCHING ON

Press in the button on the front panel: the power LED lights
POWER
green.

OBTAINING A TV PICTURE

Ensure the TV is switched on and that you have selected the correct
TV input. You should see the following image. This is the image that the
DVD player gives whenever there is no movie playing.
To protect your screen from damage caused by persistent static
images, a 'screen saver' facility moves the Arcam and DVD logos
around the screen after a certain delay.

USING THE SETUP MENUS

If you have not already done so, now would be a good time to fit the
two AAA batteries in the remote handset, taking care to get them
the correct way round. Select 'DVD' using the
remote control.
Ensure that no disc is playing and press
a menu appears on the TV screen.
The 'Setup' menu is arranged into three pages. The top line of each
shows the current page. To make a change, use the
to highlight the item, then use the
setting.
To change page, highlight the page bar at the top of the screen and use
the controls to move through the pages.
LEFT/RIGHT
In the 'Setup' menu, the
LEFT/RIGHT/UP/DOWN
so that with the highlight bar at the bottom of the screen, pressing
takes the bar to the top of the screen.
DOWN
button on the
CD/DVD
on the remote control:
SETUP
controls
UP/DOWN
controls to change the
LEFT/RIGHT
controls 'wrap around',

OPERATIONAL SETUP

O p e r a ti o n
S ub ti tle :
A u d io :
P a s s w o r d :
R ati n g :
OS D :
SUBTITLE
This setting controls the subtitles displayed on the TV.
Off No subtitles
Auto Subtitles for the Primary language on the disc
English English subtitles
Arabic Arabic subtitles, etc... (17 languages are supported)
Note that some discs may force the subtitles on regardless of how this
is set.
The default setting for this is 'Off '. Alternatively, choose the setting for
the language you prefer. Note that not all discs will have your preferred
language as a subtitle.
AUDIO
This controls the default audio track, when there is more than one
audio track present.
English English language, if available
Arabic Arabic language, if available, etc... (17 languages are
supported)
The default setting is 'English'. Choose the setting you would like as a
default.
PASSWORD
The password setting works in conjunction with the rating setting (the
next menu item), to provide a means of limiting content playback by
children (parental control).
You will see there are four dashes and a padlock symbol. Normally
the padlock symbol will be open and this means the parental control
is unlocked. Under this condition the rating setting may be freely
changed.
To lock the parental control, choose a suitable four digit number.
Don't forget your password as you will need to know it to unlock the
player. Highlight 'Password' and enter your four digit number using the
numerical keys on the handset.
When all four digits have been entered, press
player is now locked and you will not be able to change the rating
setting.
To unlock the parental control, highlight 'Password' and enter your four
digit number, followed by
OK
NOTE: You can change the password any time you lock the player.
7
1 /3
Off
E n g li s h
- - - -
V ie w a ll
O n
on the handset. The
OK
.